ISO Metric Gauges
ISO Metric Gauges are most commonly used Gauges in the Industry.
Specification :
ISO standard : Basic Dimensions : ISO 965 Part 1,2,3 – 1998, Gauging Practice: ISO 1502-1996.
Indian standard : Basic Dimensions: IS 14962 Part 1,2,3 – 2001, Gauging Practice: IS 2334 – 2001.
ANSI standard : Basic Dimensions: ANSI / ASME B 1.13 M , Gauging Practice: ANSI / ASME B 1.16 1984.
DIN standard : Basic Dimensions & Gauging Practice: DIN 13 – 1999.
BS standard : Basic Dimensions: B.S. 3643 Part I & II – 2007, Gauging Practice: B.S 919 Part III – 2007.
JIS standard : Basic Dimensions: JIS B 0209, Gauging Practice: JIS B 0251-2008.
Manufacturing Range :
Diameter 1.6 mm to 300mm & Pitches covered are 0.35mm to 8 mm.
We also offer Special gauges as per the customers drawings & requirements.
| Gauge Type | Diameter Range | Pitches in mm | Tolerance Class | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Plug Gauges. | 1.6mm - 300 mm | 0.35 to 6mm Pitches above 6mm up to 8mm can be supplied based on customer request. | 6H or any other class as per customer requirement | |||||||||||||
| Thread Ring Gauges. | 2mm - 260mm | 0.4 to 6mmPitches above 6mm up to 8mm can be supplied based on customer request. | 6gor any other class as per customer requirement | |||||||||||||
| Check Plug Gauges | 1.6mm - 300mm | To check NEW Go & Nogo Thread Ring Gauges as per above sizes | ||||||||||||||
| Wear Check Plug Gauges | 1.5mm - 300mm | To check / calibrate USED Go & Nogo Thread Ring Gauges as per above sizes | ||||||||||||||
| Check Ring Gauges | To check NEW Go & Nogo Thread Plug Gauges as per above sizes | |||||||||||||||
| Wear Check Ring Gauges | To check / calibrate USED Go & Nogo Thread Plug Gauges as per above sizes | |||||||||||||||
| Check Ring Gauges | To check NEW Go & Nogo Thread Plug Gauges as per above sizes |
Recommended Tolerance classes for Internal Threads (Plug Gauges)
| Fine | Tolerance position 'G' | Tolerance position 'H' | ||||
|---|---|---|---|---|---|---|
| Medium Coarse | S | N | L | S | N | L |
| - | - | - | 4H | 5H | 6H | |
| (5G) | 6G | (7G) | 5H | 6H | 7H | |
| - | (7G) | (8G) | - | 7H | 8H |
*S – Short length of Thread engagement
N – Normal length of Thread engagement
L- Long length of Thread engagement
Recommended Tolerance classes for External Threads (Ring Gauges)
| Fine Medium Coarse | Tolerance position 'e' | Tolerance position 'f' | Tolerance position 'g' | Tolerance position 'h' | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S | N | L | S | N | L | S | N | L | S | N | L | |
| - | - | - | - | - | - | (4g) | (5g4g) | (3h4h) | 4h | (5h4h) | ||
| - | 6e | (7e6e) | - | 6f | - | (5g6g) | 6g | (7g6g) | (5h6h) | 6h | (7h6h) | |
| - | (8e) | (9e8e) | - | - | - | - | 8g | (9g8g) | - - |